Technical Data
Ferido is a hand-kneadable, speciality resin that mixes in five minutes.The two sticks have a long shelf life but once mixed the resultant clay is at first soft and highly adhesive and then gradually hardens. Speed of hardening is dependant on temperature and at normal temperatures (20-25?C) Ferido becomes rock hard in two to four hours.After setting hard Ferido continues to cure, and is fully cured after an elapse of time equal to the setting time at the same temperature. Once fully cured Ferido can be machined, drilled, tapped, turned, filed, sawn, sandpapered and painted. Ferido is an excellent adhesive and will bond to itself or to any other materials - wood, brick, cement, metals, concrete, plastics, glass etc, but note that Ferido is not intended as a thin layer adhesive and should not be used where a paste, mucilage or thin glue is indicated. Ferido will set underwater and is heat resistant up to 300/400?C.

Shelf Life:
We recommend Ferido is stored in cool, dry conditions. Please reseal bags after use. Stored correctly this product should remain workable for about 2 years.

Pack Sizes:
500 gram, 2.5 kilo pack, 4.5 kilo pack and 25 kilo pack

Tensile Strengh (BS 2782, 301A):
3,500 Ib f/ in2 ( between metal plates 500 Ibs. per square inch) Dielectric Strengh (BS 2782,201A): kV/mm8.0,v/mil200

Color Range:
White, Black, Grey, Blue Grey, Stone Grey Brown, Chestnut, Ochre, Blue, Chrome Green
Yellow, Golden Yellow, Cardinal, Pink, Cobalt Blue Ultramarine, Opal, Orange, Carmine Rose, Red and Violet

SERVICE:
Full-training or even helping our customer to solver all problems. All requirements you need in one place. ex. Extruder Machine, Vacuum Tweezer, the magnifying glass for jeweler.

CRYSTAL SETTING SERVICE CENTER:
Every pieces is guaranteed by our well-trained staff you will be satisfied with out high quality products with reasonabl;e price.